A2 Hosting still has not fixed the Database after their servers failed AGAIN. A2 Hosting is the WORST!
Because of this, new posts are currently missing and I can only HOPE they eventually recover the table they didn't restore after their latest failure.












Next Post - Previous Post       List View



6/16/2016 6:34:27 PM

Reef Aquarium Double-Sliding Light Box



For most aquariums, a small lid or an opening in the front is enough to maintain the tank.  However, reef tanks seem to need constant maintenance and feeding corals from every angle to keep things running well.  A lid that opens at least half way along the front then is what most people would need.  Alas, do I ever do anything the easy way?

Nope.  My reef tank is two sided.  That means there is no real back or front along the length of the tank.  And a reef needs lots of light.  And since I have two sides, it means having double the light to cover both sides.

For the last year or so since replacing lights and getting the tank back into order, I have been forced to pull a light completely off the tank to get to one side, or perch it precariously on top of the other light, then do again for the other side.  Also, fish jump.  Even with these temporary guards I made covering the exits, I lost a fish to jumping when they were just a little loose from moving the lights.

So I envisioned something better.  Something safer for the fish.  Something relatively easy to access both sides of the tank.  Not to mention something that would look a lot better.

While I still need to complete the decorative "nose" of the cover that will follow the curve of the front end of the tank, I am done for the moment with things that require way too much sanding and poly and sanding and poly and....

 

For easy access to the tank, the top slides a little over half each way.

 
 

Finding something to clamp the non-moving parts down to the tank was quite a challenge, but luckily I always have some PVC laying around and was able to make brackets that hook under the edge and then screw into the framework.


It didn't slide as smoothly as I would like at first, but after rubbing some paste wax (for woodworking and such) onto the tracks, it slides great!

A picture with the lights off shows the hood more clearly.  The safety mesh that protects the fish also helps to dim the bleed-through of light without blocking too much airflow.

 


     POST LINKS FORWARD TO:
          6/23/2016 1:02:25 PM - It hasn't all been fun and sanding in the sun.
     POST LINKS BACK TO:
          8/16/2015 3:17:30 PM - Reef Tank Progress


Next Post - Previous Post       List View
COMMENTS

6/17/2016 7:25:07 AM Mom
Reef tank looks great, bet it will be much easier to maintain

Add Your Comment...

TinkerT Terms & Disclaimer


     Step one to DIY is safety. Use applicable safety equipment, read instructions, and handle all tools with care. While this site encourages a Do-It-Yourself attitude and has ideas and how-to posts, it is not responsible for any problems that arrise from attempting similar DIY projects.
     Familyweb.us and TinkerT makes no representations or warranties of any kind (expressed or implied) about the completeness, accuracy, reliability, suitability, or gramatical correctness of any information or recomendations contained on this site or found by following any link on this site. All the information provided on TinkerT is for general information and entertainment purposes only. Following any advice or information on this site is done "At Your Own Risk". Under no circumstances will Familyweb.us or TinkerT be liable for any loss or damage (including without limitation direct, indirect, or consequential loss or damage) arising from use or misuse of information provided in this website.
     Copyright Policy - Unless otherwise noted, Familyweb.us is the legal copyright holder of all material on this website. Submitions and comments will be considered the property of Familyweb.us and may be used, whole or in part, for purposes on the site or other related projects. Please feel free to copy and reprint any portion of the articles and posts on this site. However, you must include a clear label for where you got the material and include a link to the appropriate page for the post that material was copied from.
     The opinions expressed by any Third Parties (including commenters) are their own and do not represent the position or believe of Familyweb.us or TinkerT. TinkerT reserves the right to remove or edit comments for any reason deemed nessesary, including, but not limited to: spam, offensive language, inapropriatness, and general rudeness.
     TinkerT will never sell or share your email with any third party and will not send you advertizements or spam.
     Familyweb.us and TinkerT reserve the right to change the focus of, close, or sell this blog site without warning.

     While TinkerT and Familyweb.us strive to ensure all posts and comments are PG13 or less, it makes no guarantees of this and requests that anyone under 17 ask their parent's permission before signing up for the newsletter or reading this site.

     These terms and conditions are subject to change at anytime without notice.












aquariums
archives
cooking
crafts
denver
DIY
electronics
home improvement
ideas
landscaping
low budget
mountain living
nature
outdoor
painting
plants
style
the tilt
tools
travel
woodworking

instant pot
  smart scripts