A2 Hosting still has not fixed the Database after their servers failed AGAIN. A2 Hosting is the WORST!
Because of this, new posts are currently missing and I can only HOPE they eventually recover the table they didn't restore after their latest failure.












Next Post - Previous Post       List View



Doors finished.6/15/2014 8:33:42 PM

Making Use of Dead Wall Space



From the Archives:  5/26/2011

Creating More Cupboard Space...One of the things that drives me nuts about a house is any "Dead" space.  As a pack-rat with very little self-control, any space in a house that could be put to storage, but isn't... is just  wrong.

So this area under the L shaped divider between the living room and the kitchen/dining area was pretty high on my priority list of things that could be made better after hubby and I bought the house.

First step... plan, plan, plan.  Then I marked the wall with hubby's help and started the cuts.  Two supports had to be removed and placed between doors.  The other two fell between without changes.  I also added shims to existing supports to firm up some needed support for the fish tank base that sits on the divider.

I decided to use a three panel shoji screen as the doors.After finding out that buying new cupboard doors was ridiculously expensive for a hack-through-the-wall project, I decided to use a three panel shoji screen as the doors.  Not only was the screen something I picked up on Craigslist for about $20, but it also lends to the vaguely oriental style that hubby and I prefer. 

Shown here is one panel removed from the other two.  I measured and measured and figured out where to cut so that I would have two doors and enough of the side trim from the middle to create the new top trim for the doors.  Each of the three panels could be used to make two doors, but since this project would only need four doors, I saved the third panel for another project.

The sides are grooved so that the thin strips of the panel and fabric are held inside the groove.  This made it an additional challenge to cut with my jigsaw since the interior panel would start shaking when I got to it, but I still had a small distance before I was the rest of the way through the side.  Once the sides were cut, I cut through the fabric with a knife before using the jig saw to cut the wood strips.


One of the center pieces from the unused portion of screen.This is one of the center pieces from the unused portion of screen.  I used one of these pieces to add to the new ends to sandwich into the groove and hold everything in place.  However, since each piece was created with a U on both the cross and the vertical and this piece would go in place where there were no cutouts, I had to nibble out the U until it was almost all the way through the thin wood to fit it over the ends of the full piece.  You can see this new end piece holding the vertical supports firmly in place inside the groove.  In hind-sight, I probably would have cut the door a little shorter to land exactly on a cross piece instead of making one, but the door holes were already cut at this point, so I did the work to have them the height I needed.

The new end fit well.

The joint is very similar to the standard joints, though you can see the new end does not have the tongue and groove fit that the original end does.

The joint is very similar to the standard joints.

Everything would probably hold just fine from the pressure or with glue, but I decided that the corners would be stronger with an L bracket to be sure everything held in place.

Hinges.Like most of my other projects, I am using almost all materials I already have on hand.  These cupboard hinges were ones I got at Habitat for Humanity resale with plans for re-doing the cupboards in Aurora.  We never got to it, but they come in handy now, even if it means some creative planning to get them to work.

I was originally worried that the spring-close style hinge would be too strong for my light weight panel doors, but it works out very well.  They are very easy to open, but the spring close holds them firmly closed without needing any kind of latch.


They look nice from the outside, too.  Even though they are meant to be hung the opposite way with a semi-recessed door.

Doors finished.

I kept the L shape on the right side open deeper than the other cupboards since I often have a stockpile of a few types of cans that stack well and can fill back into the space a ways.  I added a back to the L where you can see the deepest support in this picture.  It is nice and deep, but is a little less than one arms length, so I can still reach everything.

Inside painted.

Like the other materials, the shelves were all ones that I had waiting in the shed from a free listing on Craigslist.  The cuts around the many supports made it quite a challenge to get them fully fitting and put in though.

Shelves in... All my cans and a little room to spare.

When I first started planning things, I wasn't sure if it would fit all my cans, but it ended up being a lot more room than I thought it would be.  I stock up when there is an exceptional sale, so having extra room is a must.




Next Post - Previous Post       List View
COMMENTS

6/16/2014 8:26:37 AM Punkin
This project as with all the ones you have completed and the ones to come are perfect. Creating space that can be smartly used where there wasn't any is amazing.
If you were to design and build a home from the ground up I can only imagine the hidden places for storage you would come up with, above and below ground.
If Bob and I were just starting out in life.  We would come to you for a design for our house.

6/16/2014 1:32:43 PM TinkerT
The trouble with building when starting out in life is that you would never know some of the things you would want... for example, before living here, I would have never expected I would like such open spaces in the house or so many windows.  Now, I would never want less.  The only trouble is that there is very little area to store things, so the major thing the house here is lacking is a giant garage with workshop for all my tools and projects.

Definitely something I want to work towards, but it may be so far off that making a little more storage inside the house is helpful whenever possible.

Add Your Comment...

TinkerT Terms & Disclaimer


     Step one to DIY is safety. Use applicable safety equipment, read instructions, and handle all tools with care. While this site encourages a Do-It-Yourself attitude and has ideas and how-to posts, it is not responsible for any problems that arrise from attempting similar DIY projects.
     Familyweb.us and TinkerT makes no representations or warranties of any kind (expressed or implied) about the completeness, accuracy, reliability, suitability, or gramatical correctness of any information or recomendations contained on this site or found by following any link on this site. All the information provided on TinkerT is for general information and entertainment purposes only. Following any advice or information on this site is done "At Your Own Risk". Under no circumstances will Familyweb.us or TinkerT be liable for any loss or damage (including without limitation direct, indirect, or consequential loss or damage) arising from use or misuse of information provided in this website.
     Copyright Policy - Unless otherwise noted, Familyweb.us is the legal copyright holder of all material on this website. Submitions and comments will be considered the property of Familyweb.us and may be used, whole or in part, for purposes on the site or other related projects. Please feel free to copy and reprint any portion of the articles and posts on this site. However, you must include a clear label for where you got the material and include a link to the appropriate page for the post that material was copied from.
     The opinions expressed by any Third Parties (including commenters) are their own and do not represent the position or believe of Familyweb.us or TinkerT. TinkerT reserves the right to remove or edit comments for any reason deemed nessesary, including, but not limited to: spam, offensive language, inapropriatness, and general rudeness.
     TinkerT will never sell or share your email with any third party and will not send you advertizements or spam.
     Familyweb.us and TinkerT reserve the right to change the focus of, close, or sell this blog site without warning.

     While TinkerT and Familyweb.us strive to ensure all posts and comments are PG13 or less, it makes no guarantees of this and requests that anyone under 17 ask their parent's permission before signing up for the newsletter or reading this site.

     These terms and conditions are subject to change at anytime without notice.












aquariums
archives
cooking
crafts
denver
DIY
electronics
home improvement
ideas
landscaping
low budget
mountain living
nature
outdoor
painting
plants
style
the tilt
tools
travel
woodworking

instant pot
  smart scripts